Ibikunzwe

USB Port Not Working : Solutions If you have a problem with the USB port(s) of your computer, here are some guidelines that may help you: Hardware issues Problem related to the connected device: Check that the connected hardware runs on another computer. Test other equipment on the same USB port Problem related to USB ports, motherboard, cables: One or more USB ports may stop workin due to a failure of the motherboard (after a power surge...). There may be a wiring problem between the port(s) and the motherboard (faulty or disconnected cable) Try the other USB ports one by one to check if they are properly connected to the motherboard or enabled in the BIOS. If either the front or rear connectors are working, it is probably due to a fault in the connection between the USB ports and motherboard (check the extension cables). Driver and software issues Check that there is no yellow exclamation m...

Excel -Type Several Lines in a Single Cell Excel -Type several lines in a single cell Issue It may be needed that you want to type multiple lines of text a particular cell. The main concern lies in the fact that under Excel , when you press the Enter Key, the cursor will move to the next cell. Solution Open Excel. Type a line of text. Use the keyboard shortcut : Alt and Enter. Type a few words and they will be entered on a new line.

With the increasing use of the internet and external hard drives virus attacks arre now much faster and common than ever before. One of the most common viruses found is the autorun.inf file. The most prevalent mode of infection of this malware is through USB flash drives . This malware generally creates multiple copies of itself in each drive as a read only and hidden file . The only way to get rid of autorun.inf file is to delete it completely using the command prompt window and running through the requisite syntax for each drive partition. Issue The autorun.inf file is a worm which spreads all over your partitions by creating a copy of itself and usually comes from USB flash drives. It won't let you access your drives by giving you an autorun menu when double clicking on your c: or your usb flash drive. Solution This is the standard procedure to delete the Autorun.inf file . Normally when a virus infects a windows sy...

 Setting Up a Fixed IP Address   In some cases, your ISP will require you to set your LAN adapter to a fixed IP address. This might be required with either PPPoE or “always-on” service. To set the address, follow these steps: 1. Log on as a Computer Administrator. Open the Network and Sharing Center window, for example, from Start, Control Panel, View Network Status and Tasks. 2. Under View Your Active Networks, click the connection name, for example, Local Area Connection. In the Status window, select Properties to open the Local Area Connection Properties dialog box. 3. Select the Networking tab, select the Internet Protocol (either Version 6 or Version 4 depending on the IP provided by your ISP), and click the Properties button. 4. Select Use the Following IP Address, and enter the IP address, subnet mask, and default gateway information provided by your ISP, as shown in Figure 3 . Figure 3. He...

If TPM hardware is not available, BitLocker can store decryption keys on a USB flash drive instead of using a built-in TPM module. Using BitLocker in this configuration can be risky, however, because if the user loses the USB flash drive, the encrypted volume is no longer accessible and the computer cannot start without the recovery key. Windows 7 does not make this option available by default. To use BitLocker encryption on a computer without a compatible TPM, you need to change a computer Group Policy setting by performing these steps: Open the Group Policy Object Editor by clicking Start, typing gpedit.msc , and pressing Enter. Respond to the UAC prompt that appears. Navigate to Computer Configuration\Administrative Templates\Windows Components\BitLocker Drive Encryption\Operating System Drives.

                      NIBA USHAKA KUREBA TV UKORESHEJE VLC kurikiza ibi bikurikira... OPEN VLC AND FOLLOW THE PICTURE BEYOND COPY AND PAST THE CHANNEL LINK AND INJOY!!!

WPA2-PSK may not be as safe as you think. There are a few attacks against WAP2-PSK. One of the most common attacks is against WPA2 is exploiting a weak passphrase.Below you will find a few easy steps on how to break WPA2 with a weak passphrase. Step 1: The first step is to verify the router configuration. Normally in a real penetration test we would not have this option, but since this is a home lab I have a little more flexibility.In this case the lab access point is securing the wireless network Wireless Lab with WPA2-PSK. You can use any wireless router to setup your wireless lab. Step 2: We will be using Kali Linux to complete this task. Kali will need a wireless card configured before it can be used by the operating system. I am using the Alfa AWUS051NH adapter. Almost any Alfa wireless adapter will work. I am a big fan of the AWUS051NH adapter because it a duel band adapter. However, this card is very difficult to obtain since it is no long...